| Excellent general-purpose portable plasma
cutting unit for a wide range of cutting tasks. Also cuts
grills and grating. Cuts 18 mm steels & ''stainless''
and 20 mm aluminium at 350 mm/min. Continuous setting for
optimal cutting, pilot arc and 6 mm stand-off makes it easy
to start cutting in the correct position (or drag cutting
up to 40 A). Gas pre- and post-flow, trigger lock function
and warning lamps help to support the operator for the best
possible operation.
Delivery includes
Torch PT 27 7.6 m, 3 m of mains cable with clamp, wear part
kit, stand-off guide, regulator and gauge. Everything is
factory-fitted.
* at 700 mm/min / at 250 mm/min
| |
PCM 875 |
| Weight, kg |
40 |
| Mains supply, V/Hz |
400/50 |
| Fuse, slow, A |
25 |
| Mains cable, Ø mm2 |
4x6 |
| Max output at 60% duty cycle, A |
60 |
| Max output at 100% duty cycle, A |
50 |
| Open circuit voltage, V |
275 |
| Setting range, A |
10-60 |
| Air, l/min |
150 |
| Pressure, bar |
4,5-5,2 |
| Cutting capacity, Fe mm |
14/22* |
|
back
l top
page 
